Operation Manual

250
Value Channel 1 0 = none
See 2, 20 (O, B) in Groups and Channels
(Null to query in text)
Value Group 1 0 for none or 2, 20 (N for none or O, B)
EVENT – Run Scheduled Event
This command manually runs a scheduled event on a unit. There is no query associated with this command.
Command Form: DEVICE EVENT <Channel> <Group>
Argument Type Size Values Units
Channel Channel 1 1 - 10
Group Group 1 21 (Q)
Reserved Unsigned Short 2 0
FE – Feedback Elimination Enable
This command enables or disables feedback elimination on the power amplifier channel.
Command Form: DEVICE FE <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels
Group Group 1 23 (J)
Value Unsigned Short 2 0 = On
1 = Off
2 = Toggle
(Null to query in text)
FEB – Feedback Elimination Bandwidth
This command sets the filter bandwidth of the notch filter. Options are a Q = 5 or Q = 10
Command Form: DEVICE FEB <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See GroupAndChannels
Group Group 1 23 (J)
Value Unsigned Short 2 0 = 5
1 = 10
Default 0 (5)
(Null to query in text)
FEDR – Feedback Elimination Dynamic Node Reset
This command will reset only the dynamic filters on the feedback eliminator. There is no query associated with this
command.
Command Form: DEVICE FEDR<CHANNEL> <GROUP>