Operation Manual

281
Command Form: DEVICE SNMPWRITECOMM [Value]
Argument Type Size Values Units
Value String 30 Write Community validation string (SET data)
(Null to query in text: Default = “private”)
SPEEDDIAL – Speed Dial a Number
This command dials a speed dial number.
Command Form: DEVICE SPEEDDIAL <Channel> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17 (R)
Value Unsigned Integer 2 1 – 20
(Null to query in text)
STRING – String Execution
This command sends the specified string out the serial port.
Command Form: DEVICE STRING [ID]
Argument Type Size Values Units
ID Unsigned Integer 4 0 – 7
(Null to query last string in text)
SYSCHECKS – System Checks
Initiates the system checks. There is no query for this command.
The System Check integer bits determine which tests are run. Each bit set generates a separate SYSRESULT
response.
COMMAND FORM: DEVICE SYSCHECKS <System Check>
Argument Type Size Values
System
Check
Hexadecimal
Integer
4 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
Network
Telephone
Mic 1
Mic 2
Mic 3
Mic 4
Mic 5
Mic 6
Mic 7
Mic 8
All other bits reserved
SYSRESULT – System Check Result
This command reports the results of the system check. This command is reportable only. It cannot be
queried or set. The System Check integer bits determine which test result will be reported. Each test results in
a separate SYSRESULT message.