Operation Manual

285
XACONN – Audible Connect / Disconnect Indication
This command selects/reports the status of the audible connect / disconnect indication. This command can be
used to replace the ACONN command for the R group.
Command Form: DEVICE XACONN <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17, 26 (R, Z)
Value Unsigned Short 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
XACONNLVL – Audible Connect / Disconnect Level
This command selects/reports the audible connect / disconnect indicator’s level. This command can be used to
replace the ACONNLVL command for the R group.
Command Form: DEVICE XACONNLVL <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17, 26 (R, Z)
Value Signed Short 2 -12.00 – 12.00
(Null to query in text)
dB
XCALLDUR – Call Duration
This command indicates how long a call has lasted. If no call is in session, this will report 0. At the time of call
termination, this command will automatically be sent out reporting the duration. This command can be used to
replace the CALLDUR command for the R group.
Command Form: DEVICE XCALLERID <Channel> <Group> <Number> <Name>
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17, 26 (R, Z)
Number String 44 1-44 Characters
Name String 44 1-44 Characters
XCALLERID – Reports Caller ID Information
This command reports Caller Identification Information. This command can be used to replace the CALLERID
command for the R group. This command is reportable only. It cannot be queried or set.
Command Form: DEVICE XCALLDUR <Channel> <Group> <Duration>
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17, 26 (R, Z)
Reserved Unsigned Short 2 0
Duration String 8 String of format HR:MN:SS
XCGROUP – Compressor Group
This command sets the compressor group for synchronized operation of the compressor. This command can be
used to replace the CGROUP command for the P group.
Command Form: DEVICE XCGROUP <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels