Operation Manual

287
Value Unsigned Short 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
XDELAYSEL – Audio Delay Enable
This command enables signal delay on a Channel. This command can be used to replace the DELAYSEL
command for the P group.
Command Form: DEVICE XDELAYSEL <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 5, 23 (P, J)
Value Unsigned Short 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
XDIAL – DTMF Dialing
This command dials a DTMF sequence or reports back the last sequence dialed. This command can be used to
replace the DIAL command for the R group.
Command Form: DEVICE XDIAL <Channel> <Group> [Number]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17, 26 (R, Z)
Reserved Unsigned Short 2 0
Number String 44 1 – 44 Chars of ‘0’ – ‘9’, ‘*’, ‘#’, ‘,’
(Null to query in text)
XDTMFLVL – DTMF Tone Level
This command selects/reports the DTMF tone’s level. This command can be used to replace the DTMFLVL
command for the R group. You can’t change level during a call.
Command Form: DEVICE XDTMFLVL <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17, 26 (R, Z)
Value Signed Short 2 -12.00 – 12.00
(Null to query in text)
dB