Operation Manual

288
XDTONELVL – Dial Tone Level
This command selects/reports the audible dial tone’s level. This command can be used to replace the DTONELVL
command for the R group. You can’t change level during a call.
Command Form: DEVICE XDTONELVL <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17, 26 (R, Z)
Value Signed Short 2 -12.00 – 12.00
(Null to query in text)
dB
XHOOK – Hook Flash
This command sends a hook flash. This command can be used to replace the HOOK command for the R group.
There is no query for this command.
Command Form: DEVICE XHOOK <Channel> <Group> <Reserved>
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17, 26 (R, Z)
Reserved Unsigned Short 2 0
XHOOKD – Hook Flash Duration
This command selects/reports the hook flash duration. This command can be used to replace the HOOKD
command for the R group.
Command Form: DEVICE XHOOKD <Channel> <Group> <Reserved>
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17, 26 (R, Z)
Reserved Unsigned Short 2 50 – 2000
(Multiples of 10 Ms only)
(Null to query in text)
Ms
XLOCALNUM – Local Number
This command sets or reports back the current value of the local number. This command can be used to replace
the LOCALNUM command for the R group.
Command Form: DEVICE XLOCALNUM <Channel> <Group> [Number]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17, 26 (R, Z)
Reserved Unsigned Short 2 0