Operation Manual

289
Number String 16 1 – 16 Chars of ‘0’ – ‘9’, ‘*’, ‘#’, ‘,’
XPBDIAL – Dial a PB Entry by Name
This command dials a speed dial number by name. This command can be used to replace the PBDIAL command
for the R group. There is no query for this command.
Command Form: DEVICE XPBDIAL <Channel> <Group> <Label>
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17, 26 (R, Z)
Reserved Unsigned Short 2 0
Number String 16 1 – 16 Chars
XREDIAL – Dial the last number again
This command redials the last number. This command can be used to replace the REDIAL command for the R
group. There is no query for this command.
Command Form: DEVICE XREDIAL <Channel> <Group>
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17, 26 (R, Z)
Reserved Unsigned Short 2 0
XRING – Ring Indication
This command indicates a ringing line. This command can be used to replace the RING command for the R
group. This command is reportable only. It cannot be queried or set.
Command Form: DEVICE XRING <Channel> <Group> <Value>
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17, 26 (R, Z)
Value Unsigned Short 2 0 = Ring Cycle Ended
1 = Ring Cycle Started
XRINGEREN – Audible Ring Enable
This command sends/reports the use of an audible ring. This command can be used to replace the RINGEREN
command for the R group.
Command Form: DEVICE XRINGEREN <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17, 26 (R, Z)
Value Unsigned Short 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)
XRINGERLVL – Audible Ring Level
This command selects/reports the audible ring’s level. This command can be used to replace the RINGERLVL
command for the R group. You cannot change this value while the phone is ringing.
Command Form: DEVICE XRINGERLVL <Channel> <Group> [Value]