Operation Manual

290
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17, 26 (R, Z)
Value Unsigned Short 2 -12.00 – 12.00 (dB)
(Null to query in text)
dB
XRINGERSEL – Audible Ring Melody Selection
This command sends/reports the audible ring melody. This command can be used to replace the RINGERSEL
command for the R group. You can’t change the value while phone is ringing.
Command Form: DEVICE XRINGERSEL <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17, 26 (R, Z)
Value Unsigned Short 2 1 – 5
(Null to query in text)
XRINGERTEST – Audible Ring Melody Test
This command plays the current audible ringer melody. This command can be used to replace the RINGERTEST
command for the R group. This command is executable only. There is no query.
Command Form: DEVICE XRINGERTEST <Channel> <Group>
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17, 26 (R, Z)
Reserved Unsigned Short 2 0
XSPEEDDIAL – Speed Dialing
This command dials a speed dial number. This command can be used to replace the SPEEDDIAL command for
the R group.
Command Form: DEVICE XSPEEDDIAL <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17, 26 (R, Z)
Value Unsigned Short 2 1 – 20
(Null to query in text)
XTE – Telco Enable
This command selects/reports the hook status. This command can be used to replace the TE command for the R
group.
Command Form: DEVICE XTE <Channel> <Group> [Value]
Argument Type Size Values Units
Channel Channel 1 See Groups and Channels
Group Group 1 17, 26 (R, Z)
Value Unsigned Short 2 0 = Off
1 = On
2 = Toggle
(Null to query in text)