Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
APPENDIX E • SERIAL COMMANDS
104
Delay Select
DESCRIPTION:
This command selects/reports the delay activation of each assignable processing channel.
BINARY FORM DETAILS
COMMAND FORM: <Header><Argument 1>
COMMAND ID: 69
ARGUMENT SIZE: 1 word
ARGUMENT FORM:
Name: Channel Group Value
Size 8 bits 8 bits 16 bits
Type Unsigned integer Unsigned integer Unsigned integer
Range See Processing in (processing) 0 - 2
Group 5 and Channels (Table 1, page 93)
RETURN VALUES:
Unit always returns the last executed delay selection in the same form as above.
TEXT FORM DETAILS
COMMAND FORM: [DEVICE] DELAYSEL <Channel> [Value]
Where:
DEVICE: See General Text command form Description
DELAYSEL Text Command
Channel See Processing in Group and Channels (Table 1, page 93)
Value
0 Parameter to disable the delay on specified channel
1 Parameter to enable the delay on specified channel
2 Parameter to toggle the delay on specified channel
Null Parameter to return the current state
RETURN VALUES
The command returns the current or updated delay selection of the channel
If Command Returns
Delay selection for channel A is enabled DEVICE DELAYSEL A 1