Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
APPENDIX E • SERIAL COMMANDS
105
Default Meter
DESCRIPTION:
This command selects/reports the setting of the default meter.
The position values are:
Alpha Numeric Level position
I 1 input level
A 2 after gain adjustment, but before filter
N 3 after filter but before gate (non-gated level)
G 4 after gate (gated level)
BINARY FORM DETAILS
COMMAND FORM: <Header><Argument 1>
COMMAND ID: 11
ARGUMENT SIZE: 1 word
ARGUMENT FORM:
Name: Channel Group Position
Size 8 bits 8 bits 16 bits
Type Unsigned integer Unsigned integer Unsigned integer
Range See Group and Channels 1, 2, 3, 7 Group Value
(I, O, M, L) 1 (ch1-8) 1-4
(ch 9-12) 1-2
2 1-2
3 1-4
7 1-2
RETURN VALUES:
Unit always returns the last executed default meter selection in the same form as above.
TEXT FORM DETAILS
COMMAND FORM: <DEVICE> DFLTM [Channel] [Group Position]
Where:
DEVICE: See General Text command form Description
DFLTM Text Command
Channel See Group and Channels (Table 1, page 93)
Group ‘I’, ‘O’, ‘M’, ‘L’. See Group and Channels (Table 1, page 93)
Position Position in the channel of the meter. See the tables above.
RETURN VALUES
The command will return the updated condition of the default meter in the same format as the command.
If Command Returns
Default meter is selected for input channel 1 position 2 DEVICE DFLTM 1 I A