Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
APPENDIX E • SERIAL COMMANDS
117
Gate Hold Time Adjust
DESCRIPTION:
This command selects/reports the setting of hold time.
BINARY FORM DETAILS
COMMAND FORM: <Header><Argument 1>
COMMAND ID: 20
ARGUMENT SIZE: 1 word
ARGUMENT FORM:
Name: Channel Group Value
Size 8 bits 8 bits 16 bits
Type Unsigned integer Unsigned integer Unsigned Float
Range See Mic input in 3 (Mic input) .10 to 8.00
Group and Channels
(Table 1, page 93)
RETURN VALUES:
Unit always returns the last executed hold time selection in the same form as above.
TEXT FORM DETAILS
COMMAND FORM: <DEVICE> GHOLD <Channel> [Value]
Where:
DEVICE: See General Text command form Description
GHOLD Text Command
Channel See Mic input in Group and Channels (Table 1, page 93)
Value
0.10-8.00 select hold time of 0.10 to 8.00 seconds
Null return the current hold time
RETURN VALUES
The command will return the updated condition of the hold time in the same format as the command.
If Command Returns
Hold time is set for 1 second on channel 1 DEVICE GHOLD 1 1.00