Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
APPENDIX E • SERIAL COMMANDS
118
Gate Status
DESCRIPTION:
This command reports the gate status of channels 1-8. This command is read only.
BINARY FORM DETAILS
COMMAND FORM: <Header><Argument 1>
COMMAND ID: 19
ARGUMENT SIZE: 1 word
ARGUMENT FORM:
Name: <Value>
Size 32 bits
Type Unsigned integer
Range bits 7 – 0 represent gate on status for Mic inputs 8 – 1 respectively
Bit 7
Bit 6 Bit 5 Bit 4 Bit 3
Mic in 8 Mic in 7 Mic in 6 Mic in 5 Mic in 4
Bit 2
Bit 1 Bit 0
Mic in 3 Mic in 2 Mic in 1
RETURN VALUES:
Unit always returns the last executed gate status selection in the same form as above.
TEXT FORM DETAILS
COMMAND FORM <DEVICE> GATE
Where:
DEVICE: See General Text command form Description
GATE Text Command
RETURN VALUES
The command will return the updated condition of the signal presence status of line inputs 9-12 and gate status of
channels 1-8. Represented as a hex number.
If Command Returns
Channels 1 and 2 are gated on DEVICE GATE 03
Channels 1 and 3 are gated on DEVICE GATE 05
Channels 1, 4 and 7 are gated on DEVICE GATE 49