Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
APPENDIX E • SERIAL COMMANDS
121
Gating Group
DESCRIPTION:
This command selects/reports which gating group each input is assigned. There can only be one selection per
input.
BINARY FORM DETAILS
COMMAND FORM: <Header><Argument 1>
COMMAND ID: 35
ARGUMENT SIZE: 1 word
ARGUMENT FORM:
Name Channel Group Value
Size 8 bits 8 bits 16 bits
Type Unsigned integer Unsigned integer Unsigned integer
Range See Mic in Group and 3 (Mic) 1 – 8
Channels (Table 1, page 93) See Gating Group in Grp and Chnls
RETURN VALUES:
Unit always returns the last executed gating group selection in the same form as above.
TEXT FORM DETAILS
COMMAND FORM: <DEVICE> GRPSEL <Channel> [Value]
Where:
DEVICE: See General Text command form Description
GRPSEL Text Command
Channel See Mic in Group and Channels (Table 1, page 93)
Value See Gating Group in Group and Channels (Table 1, page 93). If the value is null, the current
state is returned.
RETURN VALUES
The command returns the current or updated gating group selection of the channel
If Command Returns
Gating group selection for channel 1 is A DEVICE GRPSEL 1 A