Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
APPENDIX E • SERIAL COMMANDS
122
Gating Mode
DESCRIPTION:
This command selects/reports the setting of gating mode.
BINARY FORM DETAILS
COMMAND FORM: <Header><Argument 1>
COMMAND ID: 21
ARGUMENT SIZE: 1 word
ARGUMENT FORM:
Name Channel> Group Value
Size 8 bits 8 bits 16 bits
Type Unsigned integer Unsigned integer Unsigned integer
Range See Mic input in 3 (Mic input) 1-3
Group and Channels
(Table 1, page 93)
RETURN VALUES:
Unit always returns the last executed gating mode selection in the same form as above.
TEXT FORM DETAILS
COMMAND FORM: <DEVICE> GMODE <Channel> [Value]
Where:
DEVICE: See General Text command form Description
GMODE Text Command
Channel See Mic Input in Group and Channels (Table 1, page 93)
Value
1 select gating mode to auto
2 select gating mode to manual on
3 select gating mode to manual off
Null return the current mode
RETURN VALUES
The command will return the updated condition of the gating mode in the same format as the command.
If Command Returns
Gating mode is set for auto on channel 1 DEVICE GMODE 1 1