Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
APPENDIX E • SERIAL COMMANDS
125
Last Mic On Mode
DESCRIPTION:
This command selects/reports last Mic on mode for the specified gating group. There can be only one selection per
gating group.
BINARY FORM DETAILS
COMMAND FORM: <Header><Argument 1>
COMMAND ID: 28
ARGUMENT SIZE: 1 word
ARGUMENT FORM:
Name: Channel Group Value
Size 8 bits 8 bits 16 bits
Type Unsigned integer Unsigned integer Unsigned integer
Range See Gating Group in 4 0 – 8, 0x00ff
Group and Channels
(Table 1, page 93)
RETURN VALUES:
Unit always returns the last executed last Mic on selection in the same form as above.
TEXT FORM DETAILS
COMMAND FORM: <DEVICE> LMO <Channel> [Value]
Where:
DEVICE: See General Text command form Description
LMO Text Command
Channel See Gating Group in Group and Channels (Table 1, page 93)
Value
Value =0 Parameter to select last Mic mode to be disabled
Value =1-8 Parameter to select last Mic mode to be enabled on a specified channel between
1 – 8
Value =* Parameter to select last Mic mode to be last Mic
Value =Null Parameter to return the current mode
RETURN VALUES
The command will return the updated condition of the last Mic mode in the same format as the command.
If Command Returns
Last Mic mode is enabled for gating group A as last Mic DEVICE LMO A *
Last Mic mode is disabled for gating group A DEVICE LMO A 0