Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
APPENDIX E • SERIAL COMMANDS
128
Level Report
DESCRIPTION:
This command selects level status reporting.
The position values are:
Alpha Numeric Level position for groups 1 (ch. 1-8) & 3 Level position for groups 1 (ch. 9-12) & 7 Level pos. for grp 2 Level position for group 5
I 1 input level input level input level level into processor
A 2 after gain adjustment, before filter input level after gain adjustment level after gain adj. amount of compression
N 3 after filter but before gate (non-gated level) N/A N/A level after compressor & filters
G 4 after gate (gated level) N/A N/A N/A
R 5 echo return loss N/A N/A N/A
E 6 echo return loss enhancement N/A N/A N/A
T 7 ERL + ERLE N/A N/A N/A
D 8 impulse duration (tail time) N/A N/A N/A
C 9 AGC AGC N/A N/A
BINARY FORM DETAILS
COMMAND FORM: <Header><Argument 1><Argument 2>
COMMAND ID: 30
ARGUMENT SIZE: 2 words
ARGUMENT FORM:
Name: Channel Group Position Mode
Size 8 bits 8 bits 16 bits 32 bits
Type Unsigned integer Unsigned intgr Unsigned intgr Ungnd integer
Range See Grp and Channels 1, 2, 3, 5, 6, 7, Group Value 0-2
(Table 1, page 95) (I, O, M, P, A, L) 1 (Ch1-8) 1-9
(Ch 9-16) 1-2, 9
2 1-2
3 1-9
5 1-3
60
7 1-2, 9
RETURN VALUES:
Unit always returns the current level reporting frequency in the same form as above.
TEXT FORM DETAILS
COMMAND FORM: <DEVICE> LVLREPORT <Channel> <Group> [Position Mode]
Where:
DEVICE: See General Text command form Description
LVLREPORT Text Command
Channel See Group and Channels (Table 1, page 95)
Group ‘I’, ‘O’, ‘M’, ‘P’, ‘A’, ‘L’
Position Position in audio channel. See position table above.
Mode
0 Delete level from list of levels to be reported
1 Add specified level to list of levels to be reported
2 Toggle