Specifications

Power-Up Screen
Gentner PSR1212
Versi
on X.X
System
Meter
Select Preset
Lock Panel
Set Passcode
Device ID
Unit ID #
Mixer Mode
Firmware Version
Baud Rate
Flow Control
Enable Modem
Clear Password
Inputs
Outputs
Default Mete
r
RS232
Processing
LCD Menu Tree
Pressing ESC at the top of
the tree does nothing.
✍
TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
INSTALLATION AND SETUP • LCD PROGRAMMING
10
LCD Programming
The PSR1212’s front panel is intuitive to operate, thanks to its simple
interface: a 2x16 character LCD, menu buttons (described previously),
and a peak-level LED bar meter. Most of the PSR1212’s features are
programmed with G-Ware software. See Chapter 3: PR1212 G-Ware
Software for more information.
When power is applied to the PSR1212, the LCD panel will first read
INITIALIZING. If an error is displayed, contact technical support. When
initialization is completed, “PSR1212” is displayed on the top line and
“Unit 0” is displayed on the bottom line.
Menu Tree
The menu tree features three main menus, each with submenus. These
branches typically end when an adjustable parameter or viewable value
is reached. The diagram below shows the LCD menu tree.
G-Ware software is required
to complete system setup.
✍