Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
APPENDIX E • SERIAL COMMANDS
145
Off Attenuation Mode
DESCRIPTION:
This command selects/reports the off attenuation mode of input channels 1-8.
BINARY FORM DETAILS
COMMAND FORM: <Header><Argument 1>
COMMAND ID: 43
ARGUMENT SIZE: 1 word
ARGUMENT FORM:
Name Channel Group Value
Size 8 bits 8 bits 16 bits
Type Unsigned integer Unsigned integer Unsigned float
Range See Mic in Grp and Chnnls 3 (Mic) 0.0 – 60.0
(Table 1, page 93)
RETURN VALUES:
Unit always returns the last executed off attenuation selection in the same form as above.
TEXT FORM DETAILS
COMMAND FORM: <DEVICE> OFFA <Channel> [Value]
Where:
<DEVICE>: See General Text command form Description
OFFA Text Command
Channel See Mic in Group and Channels (Table 1, page 93)
Value
0-60 select off attenuation level (dB)
Null return the current off attenuation level
RETURN VALUES
The command will return the updated condition of the off attenuation level in the same format as the command.
If Command Returns
Off attenuation mode for channel 1is set for 15dB DEVICE OFFA 1 15
Off attenuation mode for channel 1 is set for 0dB DEVICE OFFA 1 0