Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
FCC COMPLIANCE
166
In case of unsatisfactory operation, the purchaser shall promptly notify the
Manufacturer at the address set forth below in writing, giving full particulars as
to the defects or unsatisfactory operation. Upon receipt of such notice, the
Manufacturer will give instructions respecting the shipment of the equipment, or
such other matters as it elects to honor this warranty as above provided. This
warranty does not cover damage to the equipment during shipping and the
Manufacturer assumes no responsibility for such damage. All shipping costs
shall be paid by the customer.
This warranty extends only to the original purchaser and is not assignable or
transferable.
Gentner Communications Corporation
1825 Research Way
Salt Lake City, Utah 84119
FCC Part 15 Compliance
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user
will be required to correct the interference at his/her own expense.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment complies with the requirements of the EU guidelines:
89/336/EEC “Electromagnetic Compatibility”
73/23/EEC “Electrical operating material for use within
specific voltage limits”
Conformity of the equipment with the above guidelines is attested by the CE
mark.
Changes or modifications not expressly approved by Gentner Communications
Corporation could void the user’s authority to operate the equipment.
Safety Information
CAUTION: Users should not attempt to make such connections themselves, but
should contact the appropriate electrical inspection authority, or electrician, as
appropriate.