Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
INSTALLATION AND SETUP • METER MENU
14
Clear Password
This parameter allows you to erase the serial port password in case it
has been forgotten. Select YES to keep the current password or NO to
erase it. Press ENTER to enable your selection.
Meter Menu
There are four submenus under the Meter Menu (see Meter-Level LCD
Parameters figure at left): Inputs, Outputs, Processing, and Default
Meter. The Meter menu selects what is shown on the front panel LCD
and peak-level LED display. Both displays show peak level indications.
Use the
▲ and ▼ buttons to select the Meter menu, then scroll through
the options and press ENTER when you reach the desired option. For
more information about the LCD and LED displays, see page 8 and the
information below.
Inputs
This submenu allows you to select which input (1-12) you want to
monitor on the LCD and LED display. Scroll to the input you wish to
monitor, then press ENTER.
Outputs
This submenu allows you to choose which output (1-12) you want to
monitor on the LCD and LED display. Scroll to the output you wish to
monitor, then press ENTER.
Processing
This submenu allows you to choose which processing channel (A-H)
you want to monitor on the LCD and LED display. Scroll to the output
you wish to monitor, then press ENTER.
Default Meter
This submenu determines what is displayed on the LED meter when a
meter is not specifically selected elsewhere in the Meter menu. The
default can be set to monitor the input, output, or processing channel
you choose.
On page 15 is a Meter Reference Point diagram. It shows where the
meter pick-up points are in the signal path through the PSR1212.
Power-Up Screen
Gentner PSR1212
Version X.X
Meter
Input
Output
Processing
Default Meter
Meter-Level LCD Parameters