Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760

G-WARE SOFTWARE • INSTALLATION

1. Boot the PC to the Windows operating system. Ensure that all other

programs or applications are closed. Insert the Audio and Video

Products CD into the CD-ROM drive.

If the Autorun feature is enabled on the PC, the Gentner Welcome

window opens. Click the Software tab to continue setup. Two drop-

down tabs appear—AP-Ware and G-Ware. Click the G-Ware tab.

If the Autorun window does not open, open the Windows Start menu

and choose Run. Type “<drive>:\\gentner.exe:” where <drive> is the

letter of the CD-ROM drive (e.g., D:\\gentner.exe).

2. At the G-Ware window, click Install G-Ware near the bottom of the

window.

3. The InstallShield Wizard opens, and guides you through the

Welcome and License Agreement windows. At the Choose Destination

Location window, choose the directory where G-Ware will be installed.

We recommend that you use the default directory.

4. Click Next or Ye s to move to proceed through the windows that

follow or No or Cancel to end the installation process. You must enter a

serial number at the User Information screen if one is not automatically

inserted.

Installation

Procedure

Choose Destination Location Window

To select an alternate desti-

nation directory, click

Browse and use the

Choose Directory window to find

the desired location. Click OK to

return to the previous window.

✍