Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760

G-WARE SOFTWARE • ADDING A PSR1212 UNIT TO A SITE

The next step is to add a PSR1212 unit to the site setup you’ve created.

This step also applies to adding a Gentner XAP 800, using the

corresponding XAP 800 toolbar button.

In the G-Ware Main Screen, click the Add PSR Unit to Current Site

button. This opens the Unit Properties — New Unit window.

Adding a PSR1212

Unit to a Site

Add PSR1212 Unit to Current Site Button

For most applications, you

should set the Unit Type to

Slave. The Master setting is

used to split audio on a linked

PSR1212 system; global control of

the system is still maintained

through the first PSR1212 unit in the

system.

✍

Unit Properties — New Unit/General Tab Window

note that the General tab is selected. Enter the Unit Name you wish to

use for the unit. Next, select the Device ID (default is 0). If you’re using

two or more networked units, enter the appropriate number the

PSR1212 unit will be in the sequence.

Then, select the Unit Type (default is slave) and Default Meter (default

is Output 12) settings you wish to use.

Next, select the Meter Refresh Rate, which determines how quickly

the PSR1212 updates meter information (default is 100ms, range is 50-

1000ms).

Next, click the Comm tab.