Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
G-WARE SOFTWARE • INPUTS 1-8
37
Configuration of inputs 1-8 is accomplished in the Input 1-8 configuration window. If
you have not done so, click In 1-8 on the Matrix screen or Inputs 1-8 on the Flow
screen. Then, click a blank area in the Input 1-8 panel area to adjust the parameters
for this channel. Note that the background color for Input 1 becomes light gray and
the label color changes from black to blue. Also, note the Gate Indicator in the upper
right-hand corner of the pane. This indicator turns green whenever this input is gated
on.
Move the cursor to the blue Input 1 label and click. This opens the Input 1-8 Labels
window. Proceed to name each input. When you are finished configuring these
inputs, click OK.
Mute mutes the input channel. The light on the button illuminates red when Mute is
activated. Default is Off.
AGC (Automatic Gain Control) toggles on and off the automatic gain control. AGC
keeps softer and louder input audio at a consistent level. It does so by attempting to
adjust the signal to a fixed +4dB target level. If the signal level and the +4dB target
level both fall within the AGC’s 12dB range, the AGC achieves the +4dB target level. If
the signal level is more than 12dB away from the +4dB target level, the AGC sets the
level 12dB closer to the target. AGC occurs after the gain and filter settings in the
audio signal path. AGC default is Off.
P Pwr (Phantom Power) toggles the phantom power on and off. Phantom power is
an auxiliary power source to power certain types of microphones. The PSR1212’s
phantom power voltage is 24VDC. Default is On.
Input 1 Configuration
Inputs 1-8
Configuration
Window