Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
G-WARE SOFTWARE • GAIN STRUCTURE
43
level of the input, as shown on the Input meter, just begins to enter the
red (clipping) zone, then reduce the gain slightly until peaks no longer
climb into the red zone. This setting will ensure that the PSR1212
maximizes the signal-to-noise ratio without clipping the signal.
Pre-Gain Meter indicates the input’s level before gain.
Post-Gain Meter shows the input’s post-gain level.
Post-Processing Meter indicates the level of attenuation up to the
gating point in the system. It reflects the post-AGC signal.
Post-Gating Meter shows post-gating level.
All meters are peak-level meters.
Copying and Pasting Settings
Right-clicking anywhere in the window opens the Copy menu, which
allows you to copy and paste all of the input settings to other inputs. To
do so, select the settings, click Copy, then select the input you wish to
apply the settings to. Then right-click and select Paste. If you wish to
copy all settings of an input to the rest of the inputs, select Apply to All.
Mic 1 Configuration
Copy Menu