Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
G-WARE SOFTWARE • FILTER CONFIGURATION
48
Threshold determines the level at which the compressor begins to
operate. The range is from -30 to +20dB. Default is 0dBu.
Ratio changes the rate of compression applied to the input signal as
the signal exceeds the threshold level. The range is 1:1 to 1:20dB.
Default is 1:1.
Attack determines how quickly compression is enabled. It is calibrated
in milliseconds. The range is .5 to 100ms in .5ms steps. Default is 10ms.
Release determines how quickly compression is disabled. The range is
100ms to 2 seconds, in 5ms increments. Default is 500ms.
When you are finished, click Close to return to the Processor Setup
window.
Filter Configuration
The Filter button opens the Processing Filters window. Here, you can
configure all filters available in G-Ware: all pass, Bessel, Butterworth, CD
horn, high pass, high shelving, Linkwitz-Riley, low pass, low shelving,
notch, and PEQ.
Processing Filters Window