Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
G-WARE SOFTWARE • TO EXPANSION BUS LABELS
53
Copying and Pasting Settings
If you wish to copy and paste the settings for Output 1 to other outputs,
right-click to open the Copy menu and proceed to copy and paste to
the outputs you wish. To name each output, click Labels to access the
Output Labels window. Click OK when you are finished. Then, click
Close to exit to the G-Ware Configuration matrix window.
To Expansion Bus Labels
Next, click To Expansion Bus to open the To Expansion Bus Labels
window. Proceed to name each Expansion Bus. Names up to 20
characters long can be entered in each field.
When you finish, click OK to save the
information and return to the G-Ware
Configuration matrix window.
To Processing Configuration
Click To Processing. This opens the To
Processing Configuration window. Note that
the To and From Processing buttons access
the same window. Configure these settings as
described in the From Processor section.
Click Close to return to the G-Ware
Configuration matrix window.
The G-Ware software is now set up for
operation. See Chapter 4 for advanced G-
Ware operation.
To Expansion Bus Labels Window
To Processor Configuration Window