Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
ADVANCED OPERATION • DOCUMENT COMPARE UTILITY
68
G-Ware Open Window
In the G-Ware Open window, you can select files to
compare through the G-Ware Files tab or select
connected units or sites through the G-Ware
Connections tab. When you have made a selection,
click Refresh to update the status of the unit, site, or
connection. Then click Open.
Repeat this process with the Site 2 Find File button
to select the second unit, site, or document for
comparison.
When you make your selection and click Open in the Site 2 Open
window, G-Ware automatically compares information from the selected
items and displays a table of parameters which differ (note that the
actual differences are not displayed at this point). This process can take
a minute or two.
To view the difference(s) between two
sources on a single parameter, select the line
in the table you wish to examine, then click
Preview. This opens the Print Preview
window, which shows what the differences
are.
To print the report, click Print (you can also
click Print in the Compare Utility window to
print the report). The other buttons in this
window allow you to tailor the view of the
report and browse sequentially through each
page.
When you finish viewing or printing the report,
close the Print Preview window.
Print Preview Window