Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760

APPLICATION EXAMPLE • HOTEL/CONVENTION CENTER

Speaker A

Room A

Room B

Room C

Speaker B

Speaker C

Mic 2

Mic 4

Mic 6

Mic 1

Mic 3

Mic 5

Removable

room partition

Removable

room partition

Control Panel

Hotel/Convention Center

The Hotel/Convention Center diagram above shows three rooms with

removable partitions separating the rooms. The PSR1212 can be pre-set

to route microphone audio to one room or any combination of rooms.

For example, say all three rooms are closed off for separate meetings;

you can configure a preset to route the microphone audio only to the

speaker in the same room, with microphone gating properties applied

as desired. Then, say the divider between Rooms A and B is removed

for a combined meeting. You can use a preset that gates off

microphones 3 and 4, while the audio from microphones 1 and 2 are

routed to all speakers in Rooms A and B—while retaining the settings for

the ongoing meeting in Room C. Later, when all partitions are removed

for a final group meeting, you can use a preset that gates on only

microphones 1 and 2, but routes audio to all speakers.

The use of other audio sources can be configured using the PSR1212’s

parametric equalizers and filters to enhance audio quality.

After you have installed the PSR1212 unit and software, and made the

necessary connections, follow the steps below to set up the PSR1212

for this application.

Step 1. Establish a PSR1212 Site

In G-Ware software, establish a new PSR1212 site and then add the

PSR1212 to the site, as described on pages 21-24.