Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
APPLICATION EXAMPLE • HOTEL/CONVENTION CENTER
76
When Rooms A and B are combined, you will want to gate off the mics
in either Room A or B, and route one or both of the other two mics to
Speakers 1 and 2. Make the appropriate routing and gating changes in
the Preset Configuration matrix to do this. Note that Preset 3 in Room C
is unaffected; an ongoing meeting in that room is not disturbed when
Preset 5 is activated.
Continue configuring Preset 5 by establishing the Change Preset Label,
Mixer Controls, etc. as desired in the Preset Sidebar window.
Preset 6
Select 6 in the Preset Selection menu.
Preset 6 is for an all-rooms combined scenario. This requires Pins 1 and
3 to both be set to Low, as both partitions are open.
If the “front” of the combined room is in Room A, gate off Mics 3-6 in the
other rooms and route audio to all speakers via the Preset
Configuration matrix.
Step 4. Save and Check
After you finish configuring the presets, you can save them by clicking
Save Preset.
Step 5. Macros
When you have finished establishing the presets, Click M in the G-Ware
toolbar to configure or edit the macros you wish to use. See Macro
Mode on page 61 for more information.
A Room Preset/Configuration worksheet is provided on page 84.
Pin Assignment for Preset 6