Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760

APPENDIX B • CONNECTOR PINOUTS

Pin Number User Definable* Status Momentary/Latching Default Description

7 No C L Preset select bit

8 No S L Preset select status for Pin 7

9 No C L Preset select bit

10 No S L Preset select status for Pin 9

11 No C L Preset select bit

12 No S L Preset select status for Pin 11

13 No C L Preset select bit

14 No S L Preset select status for Pin 13

15 No C L Preset select bit

16 No S L Preset select status for Pin 15

17 No C L Preset select bit

18 No S L Preset select status for Pin 17

19 No C L Preset select bit

20 No S L Preset select status for Pin 19

21 No connection

22 No connection

23 No - +5VDC 100mA

24 No - +5VDC 100mA

25 No - Ground

*Control/Status Pinout Note:

The first 16 pins on the Control/Status Port A are programmable via the G-Ware software.

Table 4: RS-485 Remote Control Port Pinout (for Remote Panel A and B connectors)

Pin Number

Control

1 +15VDC 300 mA (over-current protected)

2 Data+

3 Data-

4 Ground

RS-485 Remote Control Ports

4 3 2 1 4 3 2 1