Operation Manual

209
Using Device Log
In the Device Log window, select the events you want to log using the Event Selection check boxes.
Events available for logging include:
Reset• : Reports unit reset events
Errors• : Reports internal unit errors
Access: • Reports all web, Telnet, front panel, and USB access events
System Checks• : Reports the pass/fail status of System Checks
Firmware Download• : Reports firmware downloads
Default• : Reports unit default events
Safety Mute• : Reports safety mute events
Macro• : Reports Macro execution events
Preset• : Reports when Presets are run
Audio Clipping• : Reports audio clipping events
Telco On/Off• : Reports when the telco line goes on or off hook
Dial• : Reports dial command events including DTMF, Phonebook, Speed Dial, and Redial
Call Duration• : Reports the time between on and off hook events for all calls
Microphone Gains• : Reports microphone gain levels
Processor Gains• : Reports processor gain levels
Fader Gains• : Reports fader gain levels
Telco Gains• : Reports telco gain levels
Power Amp• . Gains: Reports power amp gain levels
Caller ID• : Shows Caller ID report
Power Amp. Errors• : Reports power amp errors
NOTE: All device events and Event Scheduler events are logged automatically.
Use the Refresh, Clear, Save, and Print buttons to refresh the log display, clear the log, save the log to a text file,
and print the log.