StreamNet™ StreamNet-Enabled Devices/ VIEW™ VIRTUAL MATRIX Control and Installation Guide
ClearOne 5225 Wiley Post Way Suite 500 Salt Lake City, UT 84116 Telephone 1.800.283.5936 1.801.974.3760 TechSales 1.800.705.2103 FAX 1.801.974.3669 E-mail tech.support@ClearOne.com support@netstreams.com On the Web www.ClearOne.com www.netstreams.com www.StreamNetpartners.com StreamNet-Enabled Devices/VIEW Virtual Matrix Control and Installation Guide ClearOne Part No. DOC-0090-001 January 2013 (Rev. 1.0) © 2013 ClearOne, Inc. All rights reserved.
Table of Contents AV Distribution and Control Using StreamNet..........................................................................1 Distribution Model with StreamNet-Enabled Products.....................................................................................................1 Download and Install the Software...................................................................................................................................1 Running the VVM Application............................
AV Distribution and Control Using StreamNet StreamNet technology based products are designed to distribute audio, video and control data using standard networking technology. By embracing open standards, we have developed a system that leverages reliability, expandability and cost-effectiveness for customers.
Running the VVM Application The View Virtual Matrix software is executed by double-clicking on the desktop icon. When initialized it performs discovery of the StreamNet system running on the network segment and if any StreamNet devices are found VVM will dynamically build a system GUI or matrix placing the encoders along the left side of the matrix (inputs), and decoders along the top of the matrix (outputs).
»» Note: Clicking on the global NO SOURCE button on the top left of the interface will select no source (white) for all decoders on your segment of the network. CONTROL BUTTONS VMM also has two rows of control buttons at the bottom of the matrix that only appear if you select one of the encoder or decoders.
Known Issues 1. This version of the VIEW Virtual Matrix (VVM) is released only for use with the Windows 7 operating system. 2. When sending a command to Roommated devices, the VVM does not immediately indicate the proper status for all Roommated devices. The command executes as expected in real time but the status update may take several minutes to become visible on all Roommated devices in the matrix. 3.
Service and Support If you need assistance setting up or operating your product, please contact us. We welcome your comments so we can continue to improve our products and better meet your needs. Technical Support Telephone: 1-800-283-5936 E-mail: tech.support@ClearOne.com Web site: www.ClearOne.com, www.NetStreams.com Sales Telephone: 1-800-707-6994 E-mail: TechSales Telephone: sales@ClearOne.com E-mail: techsales@ClearOne.