USB Adapter Installation & Operation Manual ClearOne Communications, Inc.
ii Table of Contents Introduction Table of Contents Introduction Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 The USB Adapter, from ClearOne, formerly VideoLabs, is the ultimate USB video Professional services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Product registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 Product Overview 3 Product Overview Product registration Please register your USB Adapter using the online registration form in the Product section at www.clearone.com. We are better able to provide technical assistance when your product is properly registered. Registration information is also used to notify you of upgrades and new product information. Product returns All product returns require a return authorization (RA) number.
Getting Started Getting Started Installing USB drivers 5 Getting Started 7. The file path is now displayed in the Run utility. Click OK to run Setup.exe. 8. The InstallShield Wizard will guide you through the driver installation. Follow the onscreen prompts. Before you can use your USB Adapter, you must install the proper USB drivers on your PC or Mac.The drivers are found on the USB Software and Driver Disk that came with your USB Adapter. To install USB drivers on a PC 1.
6 Getting Started To install USB drivers on a Mac The USB Adapter is compatible with Mac OS 8.6 through 9.2.2. 1. Insert the Software and USB Driver Disk into the CD-ROM drive. 2. Double-click the ArcSoft icon to open the CD content window. 7 Getting Started Connecting the USB Adapter To a video source Use either a composite video cable or an S-video cable to connect the USB Adapter to the video source such as a ClearOne camera or a VCR.
8 ArcSoft Software 9 ArcSoft Software ArcSoft Software To install on a Mac OS The USB Software and Driver Disk includes two programs for video capture and 1. Double-click the Video Impression 1.6 installer (see Figure 7) and follow the onscreen prompts. editing: VideoImpression 1.6 and PhotoStudio 5. Please note that the VideoImpression 1.6 version on this CD is manufactured specifically for ClearOne 2.
10 ArcSoft Software You cannot change the video source in PhotoStudio. However, the changes made in Video Impressions will be applied to PhotoStudio. 11 Appendix Selecting NTSC or PAL video The default USB Adapter setting is NTSC. To select PAL video 1. Launch Video Impression 1.6 (see Figure 10). 2. Click new and then click the capture icon on the next screen. 3. On the video capture screen, click the source icon (see Figures 11 and 12). This will open a window with several tabs (see Figure 13). 4.
12 Appendix Can I easily switch between multiple USB video capture devices on Mac OS? 13 Appendix Warranty No.To switch between devices, you must uninstall the driver(s) for one device and install the driver(s) for the other. ClearOne Communications, Inc. (Manufacturer) warrants that this product is free of defects in both materials and workmanship.
14 Appendix assume any obligation or other liability in connection with the products. No action, regardless 15 Appendix Compliance of form, arising out of or relating to the product or this warranty, may be brought by end user more than one (1) year after the cause of action has accrued.
16 Appendix Standard(s) to which Conformity is declared: 17 Appendix USB Adapter application examples 89/336/EEC “Electromagnetic Compatibility (EMC) Directive” EN 55022: 1998 (Emissions) Specification for limits and methods of measurement of radio interference characteristics of information technology equipment. EN 61000-3-2:1995/A1/A2:1998 Part 3: Limits - Section 2: Limits for harmonic current emissions.
