Owner`s manual

-8-
Viewing Your Phone Number
To view the phone number of your cellular phone, press C
with the phone in the standby mode. The phone number appears
on the bottom line of the display for approximately three sec-
onds.
Retrieving Voice Mail
If voice mail service is available through your cellular provider,
you can easily retrieve your voice mail messages by pressing
E1 with the phone in the standby mode. If the voice mail
retrieval phone number has been set up in your phone, the
phone number is automatically dialed. Follow your cellular ser-
vice provider instructions for voice mail retrieval.
Storing Voice Mail Number
See “Store As Voice Mail Number” on page 17.
Retrieving Text Messages
If text messaging service is available through your cellular pro-
vider, you can easily view any text messages received in your
phone by pressing
E2 with the phone in the standby
mode. See “Text Messages” on page 15.
Using the Phone Book
Up to 99 phone numbers can be stored in the phone book. Once
phone number entries are stored, the phone book is at your fin-
gertips for easy dialing. To dial a phone number stored in the
phone book, press
B with the phone in the standby mode to
access phone book . Use the
E or B keys to locate the desired
phone number and press
S. To add, view, edit, or delete phone
book entries, see “2. Phone Book” on page 11.
Setting the Time and Date
To access the clock menu for setting the correct time and date,
press
M461. The current time and date settings are
displayed. Key in the correct hour; press
B. Key in the cor-
rect minutes; press
B. Press M to select either a.m. or
p.m. Key in the correct month by entering in the corresponding
number from 1 through 12 for the desired month; press
B.
Key in the correct day of the month from 1 through 31; press
B. If the correct year is displayed, press N to save the
clock entry and to exit the clock menu. (Note that to enter the
date “February 29” during a leap year, the year must be entered
before the day.) If the correct year is not displayed, key in the
corresponding four digits of the correct year, and press
N to
save the time and date settings, and to exit the clock menu.