Owner`s manual

-18-
Lock
Auto Lock
To protect your phone from unauthorized usage, you can set
your phone to automatically lock when it is turned on. With
the phone in the standby mode, press
M411.
As prompted, enter the 4-digit password. Press 2 to set
the automatic lock selection to on.
If automatic lock is set to on, the phone is locked when it is
powered on. To unlock the phone, press
M0, enter the
4-digit password as prompted, and press
2 for unlock.
Press
N to exit the lock menu. To deactivate the auto-
matic lock setting, press
M411, enter pass-
word, and press
1. Press N to exit the lock menu.
Set (Change) Password
The 4-digit password used to access all secured menu
selections and to lock the phone can be changed. Press
M412. As prompted, enter the current 4-digit
password and then enter the desired new 4-digit password.
Press
M. The phone automatically resets and powers on
again. The new password must now be entered to access
secured menu settings.
Call
Any Key Answer
With the any key answer setting activated, any key except
N and P can be pressed to answer the phone. Press
M421. Press 1 to set any key answer to Off
or press
2 to set any key answer to On. When set to On,
you can answer a call with any key except
N or P.
Analog/Digital Call Type
Your digital phone operates on either a digital or an analog
system control channel. As shown in “Phone Layout” on
page 3, the current system control channel is indicated on
the standby mode display by the
! icon for digital or the /
icon for analog. Even when your phone is operating on a
digital control channel, the voice channel your phone uses
Menu Shortcut
M41
Menu Shortcut
M411
Menu Shortcut
M412
Menu Shortcut
M42
Menu Shortcut
M421
Menu Shortcut
M422