Owner`s manual

-26-
Backlight
When your phone is connected to an in-vehicle handsfree
adapter, the keypad and display backlight can be set to
remain illuminated continuously. To select the backlight set-
ting, press
M482. Press 2 for the phone
backlight to remain on continuously in a handsfree configu-
ration or press
1 to turn it off. Press N to exit the
backlight menu.
Auto Answer
When your phone is connected to an in-vehicle handsfree
adapter, the phone can be set for automatic answering of
incoming calls. To activate the automatic answer setting,
press
M483. Press 2 to turn on automatic
answering or press
1 to turn off automatic answering.
Press
N to exit the auto answer menu.
Reset Settings
The current phone selections can be cleared and reset to the
factory default settings. To reset the phone settings, press
M49. As prompted, enter the 4-digit password. Press
2 to reset all selections to the default settings or press 1
to maintain the current settings. Press
N to exit the reset
settings menu.
5. Lock/Unlock Keypad
Your phone keypad can be easily and quickly locked to prevent
inadvertent key pressing when the phone is turned on. Press
M5 to lock keypad; press M5 again to unlock key-
pad. If a key is pressed when the keypad is locked, the following
message is displayed:
Keypad is locked. Use MENU 5 to Unlock
Note that even with the keypad locked, you can still dial 911 and
press
S to call for emergency services.
Menu Shortcut
M482
Menu Shortcut
M483
Menu Shortcut
M49
Menu Shortcut
M5