Owner`s manual

-29-
8. Digits Editing
The Digits Editing Menu can be accessed by pressing M8.
The Digits Editing Menu is displayed below.
Automated telephone systems prompt you through a recorded
message to enter a set or sets of identifying numbers such as a
credit card account number, bank account number, or personal
identification number. You can use your phone to easily dial or
store multiple sets of numbers, for accessing automated sys-
tems, by separating the sets of digits with indicators referred to
as pause marks. Pause marks alert your phone to wait or pause
before sending the remaining sets of digits. There are two types
of pause marks: manual and automatic. The two types are
described below.
Manual Pause
When entering the digits of an automated system telephone
number and any additional strings of numbers needed to com-
municate with the system, you can insert manual pauses
between the sets of digits. To enter manual pause marks, enter
in the telephone number; press
M81. A “P” is displayed
after the phone number. Enter in the next set of digits. If neces-
sary, press
M81 to insert another manual pause and
then enter in the next set of digits. When the automated system
telephone number is dialed, your phone waits to transmit the
sets of numbers following a manual pause mark. The following
message is displayed:
Press SND For Manual Pause Dial
As prompted by the automated system, press
S to send the
next set of digits. Continue to press
S to send any remaining
sets of digits.
Menu Shortcut
M8
D i g i t s
e d i t i n g
1 . M an u al
P au s e
2 . A u t o
P au s e
Use B and E
to scroll through
and view the entire
Digits Editing Menu
3 . L i n k t o
P h o n e b o o k
Menu Shortcut
M81