User's Manual

Venture-Base Installation and Operations Manual Page 3
Technical or Setup Assistance • Telephone: [phone] (USA)
801.975.7200 (worldwide) • Worldwide Web @ http://www.gentner.com
Several accessory options are available including
receivers, headphones, battery rechargers, portable
transmitter, etc., to fit your needs. Contact Gentner
Communications or your dealer for information.
The Venture-Base was designed for ease in
operation. The Venture-Base front-panel controls
(See Figure 1, below.) perform the following
functions:
1. Power LED. This LED lights when power is
applied.
2. Power Button. This push-on/push-off button
turns the Venture-Base ON/OFF.
3. Audio Level LEDs. These three LEDs indicate
the incoming audio level:
• Amber=Low
• Green=Normal (occasional red flashes, 5–10
percent, acceptable
• Solid Red=High.
4. Audio Input Level. This control adjusts the
audio-input level. To set, slowly turn up the control
(with audio playing) while monitoring the LED
indicators [3], until the green LED is lit 90–95
percent of the time (red LED flashing occasionally,
5–10 percent).
5. Process. This control sets the overall
compression level. Set it wherever the effect is most
pleasing (typically at 10 o’clock).
6. In. This push-on/push-pff button activates/
deactivates the Aphex Aural Exciter process. This
enhancement can be switched in and out.
Accessories
Front Panel
Controls
Figure 1. Venture-Base front panel controls