Installation manual

6 tEChnICal suPPort: 800.283.5936
THE D110 IN A NETWORK
An E120 Encoder receives input from an AV Source Device such as BluRay Player or DVD Player,
then distributes it over a TCP/IP network using a standard 100 Mbit or gigabit Ethernet connection.
The D110 Decoders, as counterparts, are installed at the locations of the target video displays.
They operate together: the Encoder providing the IP data for the Decoders to deliver to the display.
The output of the D110 decoder to the display device is controlled by a configured TouchLinX de-
vice.
CONNECTING THE D110
The D110 Decoder connections are from the back of the unit as shown in the following diagram.