Installation manual

8 tEChnICal suPPort: 800.283.5936
D110 SCREENS IN THE DEALER SETUP PROGRAM
Verify the configuration information on the tabs for the D110 device as shown in the following
screen examples:
aDDIng an D110 to a ProJECt
1. Enter the following information:
Device Name - Edit to name the D110 Device.
Model Number - Select the D110 Device.
2. Enter the following information:
GPIO Name - This is mainly used in macros By default this receives the Device Name.
Room Name - This is to conveniently identify the room the decoder is in your project.