Installation manual

InstallatIon Manual 9
Current IP Address - The current IP address of the D110.
Current Subnet Mask - The current subnet mask of the D110.
Device Type - The type of device that this is.
Model Number - The D110 model number.
Firmware Version - What firmware version is currently running on the D110.
Device Name - Descriptive name assigned to the device when creating the project.
Serial Number - Displays the D110 serial number.
Device Comments - Indicate where the device is installed so that if you need to return to the
installation for service or upgrading devices, you can have access to this information in the project
file.
3. Select Save & Continue
4. Complete the information for each D110 in your project.
Info tab