Installation manual

10 tEChnICal suPPort: 800.283.5936
SHOW ADVANCED OPTIONS
Advanced options can be accessed by clicking on the Show Advanced Options button in the lower
portion of the Info Tab screen.
Enable Static IP Address - Checking the check box allows entry of an IP address for the decoder.
Enable DHCP - Checking the check box allows the decoder IP Address to be assigned by a DHCP
Server.
Network Subnet Mask - Allows setting the subnet for the decoder.
Gateway IP - Allows setting a specific gateway node to serve as an access point to another
network.
TTL - (Time To Live) This sets the number of routers your stream can go through for UDP Unicast
and Unicast access methods.
Network Latency - This is used to set a network latency threshold in ms for the decoder.
After settings are made, click on Apply to save the optional setting in the configuration. The changes
do not take place in the device until the configuration is sent to the decoder.