Installation manual

InstallatIon Manual 11
Room Name - Select the room name for the decoder.
Display Control Driver - Select the device driver (.lua file) used to control the display. IR appears
as the default supporting an Infrared remote, appears as the default.
» NOTE: A replacement .lua file can be created from a template that will allow
customizing the VIEW Pro encoder/decoder to receive RS-232 commands instead
of IR. For more information regarding creating an using template files, see the
VIEW Pro RS-232 Control section later in this document.
Audio Devices - Check the decoder outputs providing the audio stream. Decoder Audio Outputs
can be discrete outputs or paired with the video output using the “Linked Audio to Video Output”
option. Otherwise the audio outputs can be custom named and used discretely from the Decoder
video output.
Auto Start Last Known Source - Select if the decoder is to auto-start using the last known source.
DIsPlaY outPuts tab