User manual

InstallatIon Manual 15
PREMIUM FEATURES
Legacy Audio Support - This Premium Licensed Feature allows the creation of Audio-Only Streams
which can be selected and listened to using the ClearOne Legacy Renderers (SLxxx, VLxxx).
MultiCast RTSP Support - This Premium Licensed Feature allows an RTSP-compatible A/V or
audio-only stream to be created within the Encoder. When creating an Multicast RTSP stream, the
Basic Features box for Enable RTSP Stream must also be checked.
Multicast RTSP Streaming means that the Encoder will create only one instance of the A/V
or Audio Only Stream, and will send it to Players requesting a connection via Multicast. Any
number of Players can attach to this Stream without increasing bandwidth or processing loading
on the Encoder. Multicast RTSP requires Licensing, but any number of Players can join the
Stream without additional overhead CPU or Networking capacity being used due to the use of
the Multicast Networking.
EDITING STREAM PRESETS
User Video and Audio Presets can be created, deleted or edited for use in any stream configuration
to meet the requirements of the sources and encoder. Once a preset has been created it can be
assigned and enabled to any device stream.
» NOTE: Dealer Setup comes with several pre-defined preset settings for video and
audio. These pre-defined presets can be used, but cannot be deleted nor edited;
only user-created presets can be changed or removed.
Click on the Edit Presets button to open the Preset Editor screen.
The Preset Editor screen has panels listing video and audio presets. Selecting a preset from either
of the panels presents the selected preset characteristics in the right hand panel.
Adding or Deleting of presets is done with the Add and Delete buttons. Click on the Edit Presets
button to open the Preset Editor screen.
The Preset Editor screen has panels listing video and audio presets. Selecting a preset from either
of the panels presents the selected preset characteristics in the right hand panel.
Adding or deleting of presets is done with the Add and Delete buttons.