Owner manual

Furniture Service Department: 800.283.5936

ATTACHING THE CODEC SHELF

» Note: The Codec Shelf supports a set-top codec or PTZ camera; using the shelf is

optional.

1. Align the Codec Shelf with the guiding holes on the Vertical Support.

2. Secure the Codec Shelf to Vertical Support using the attached bolts on Vertical

Support, four 5/16 Washers, and four 5/16 Nuts.

» NOTE: The Codec Shelf can be positioned on the Vertical Support to accommodate

various sizes and styles of plasma screens.

FIGURE 2.14 Codec Shelf Installation for Single and Dual Carts