Owner manual

Assembly

5. Attach the Rail Track to the Horizontal Support using two 8-32 Pan Head Screws.

6. Slide the Camera Bracket down over rail.

NOTE

: Attaching the Camera Bracket is optional. The bracket is normally used with

codecs that have a detachable camera or with a small PTZ camera. This

bracket allows the camera to be placed at eye-level between the monitors.

» NOTE: To adjust the Camera Shelf height, pull the Adjusting Pin out of the Rail Track,

slide the Camera Bracket to the desired height, and replace the Adjusting Pin.

7. Securely anchor the plasma Static Mounts (not supplied) to the Horizontal Support

using eight 5/16 ¾” Bolts, eight 5/16 Washers and eight 5/16 Nuts.

» NOTE: Adjust the position of the Static Mounts based on the size of the plasma

screens.

FIGURE 2.8 Camera Bracket to Rail Track Installation

FIGURE 2.9 Static Mount Installation