Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
APPENDIX E • SERIAL COMMANDS
113
Gate Ratio Adjust
DESCRIPTION:
This command selects/reports the setting of the gate ratio.
RETURN VALUES:
Unit always returns the last executed gate ratio selection in the same form as above.
TEXT FORM DETAILS
COMMAND FORM: <DEVICE> GRATIO <Channel> [Value]
Where:
DEVICE: See General Text command form Description
GRATIO Text Command
Channel See Mic Input in Groups and Channels (Table 1, page 95)
Value
0-50 Parameter to set gate ratio (dB)
Null Parameter to return the current gate ratio (dB)
RETURN VALUES
The command will return the updated condition of the gate ratio in the same format as the command.
If Command Returns
The gate ratio of channel 1 is 15dB DEVICE GRATIO 1 15
Gate Reporting
DESCRIPTION:
This command selects/reports the gate status.
RETURN VALUES:
Unit always returns the current gate status reporting frequency in the same form as above.
TEXT FORM DETAILS
COMMAND FORM: <DEVICE> GREPORT <Mode>
Where:
DEVICE: See General Text command form Description
GREPORT Text Command
Mode 0 = Off, 1 = On, 2 = Toggle
RETURN VALUES
The command will return the updated condition of the gate status reporting in the same format as the command.
If Command Returns
The gate status is reported DEVICE GREPORT 1