Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
APPENDIX E • SERIAL COMMANDS
114
Gating Group
DESCRIPTION:
This command selects/reports which gating group each input is assigned. There can only be one selection per
input.
RETURN VALUES:
Unit always returns the last executed gating group selection in the same form as above.
TEXT FORM DETAILS
COMMAND FORM: <DEVICE> GRPSEL <Channel> [Value]
Where:
DEVICE: See General Text command form Description
GRPSEL Text Command
Channel See Mic in Groups and Channels (Table 1, page 95)
Value See Gating Group in Groups and Channels (Table 1, page 95). If the value is null, the current
state is returned.
RETURN VALUES
The command returns the current or updated gating group selection of the channel
If Command Returns
Gating group selection for channel 1 is A DEVICE GRPSEL 1 A
Gating Mode
DESCRIPTION:
This command selects/reports the setting of gating mode.
RETURN VALUES:
Unit always returns the last executed gating mode selection in the same form as above.
TEXT FORM DETAILS
COMMAND FORM: <DEVICE> GMODE <Channel> [Value]
Where:
DEVICE: See General Text command form Description
GMODE Text Command
Channel See Mic Input in Groups and Channels (Table 1, page 95)
Value
1 select gating mode to auto
2 select gating mode to manual on
3 select gating mode to manual off
Null return the current mode
RETURN VALUES
The command will return the updated condition of the gating mode in the same format as the command.
If Command Returns
Gating mode is set for auto on channel 1 DEVICE GMODE 1 1