Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
APPENDIX E • SERIAL COMMANDS
119
RETURN VALUES
The command will return the updated condition of the level reporting in the same format as the command.
If Command Returns
The level of the non gated Input 3 is to be reported DEVICE LVLREPORT 3 I N 1
Level Report Rate
DESCRIPTION:
Sets the level report rate for the unit and activates/deactivates level repeating.
RETURN VALUES:
Unit will return the updated state of the last selection in the same form as the command.
TEXT FORM DETAILS
COMMAND FORM DEVICE LVLRRATE [Value]
Where:
DEVICE: See General Text command form Description
LVLRRATE Text Command
Value 0 to stop reporting but leave statuses set, 1 to stop reporting and clear all report statuses, 50
– 1000ms
RETURN VALUES
Unit will return the updated state of the last selection in the same form as the command.
Example
#50 Lvlrrate 100 repeats a meter every 100ms.
Lock Front Panel
DESCRIPTION:
This command sets and reports the status of front panel access for the unit. When the unit is locked, access is not
allowed to the unit until the unit is unlocked either by a serial command or by entering in the front panel password.
ARGUMENT TABLE:
Value Action
0 Unlock Panel
1 Lock panel
2 Toggle value
3 Lock when timed out
RETURN VALUES:
Unit always returns the current state in the same form as above.