Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
APPENDIX E • SERIAL COMMANDS
124
Mic/Line Adjust
DESCRIPTION:
This command selects/reports the setting of coarse gain adjustment on the input channels 1-8. The three settings
are 0dB, 25dB, and 55dB.
RETURN VALUES:
Unit always returns the last executed coarse gain adjustment selection in the same form as above.
TEXT FORM DETAILS
COMMAND FORM: <DEVICE> MLINE <Channel>[Value]
Where:
DEVICE: See General Text command form Description
MLINE Text Command
Channel See Mic Input in Groups and Channels (Table 1, page 95)
Value
1 select coarse gain adjustment to 55dB
2 select coarse gain adjustment to 25dB
0 select coarse gain adjustment to 0dB (Line Level)
Null return the current coarse gain adjustment
RETURN VALUES
The command will return the updated condition of the coarse gain adjustment in the same format as the command.
If the command sent changes the state for that channel, the new updated state is returned.
If Command Returns
Coarse gain is set to be 55dB on input channel 1 DEVICE MLINE 1 1
Minimum Gain Setting
DESCRIPTION:
This command changes or reports back the minimum gain setting for an input, output or assignable processing
block.
RETURN VALUES:
Unit will return the updated state of the last selection in the same form as the command.
TEXT FORM DETAILS
COMMAND FORM: DEVICE MIN <Channel> <Group> [Value]
Where:
DEVICE: See General Text command form Description
MIN Text Command
Channel See Groups and Channels (Table 1, page 95)
Group I, O, M, P, L
Value
-65.00 – 20.00 Parameter to set the minimum gain setting
Null Parameter to return the current setting
RETURN VALUES
Unit will return the updated state of the last selection in the same form as the command.
If Command Returns
The minimum gain setting on input channel 2 is –10dB DEVICE MIN 2 I –10