Specifications

TECHNICAL SUPPORT: 1.800.283.5936 (USA) OR 1.801.974.3760
APPENDIX E • SERIAL COMMANDS
127
Mute
DESCRIPTION:
This command selects/reports the setting of mute on input, output or processing channels.
RETURN VALUES:
Unit always returns the last executed mute selection in the same form as above.
TEXT FORM DETAILS
COMMAND FORM: <DEVICE> MUTE <Channel> <Group> [Value]
Where:
<DEVICE>: See General Text command form Description
MUTE Text Command
Channel See Groups and Channels (Table 1, page 95)
Group ‘I’, ‘O’, ‘M’, ‘P’, ‘L’. See Groups and Channels (Table 1, page 95)
Value
0 select mute off
1 select mute on
2 select mute to toggle
Null return the current mode
RETURN VALUES
The command will return the updated condition of mute in the same format as the command.
If Command Returns
Mute is set to be on for input channel 1 DEVICE MUTE 1 I 1
Noise Cancellation Depth Adjust
DESCRIPTION:
This command selects/reports the setting of the noise cancellation amount for each microphone channel.
RETURN VALUES:
Unit will return the updated state of the last selection in the same form as the command.
TEXT FORM DETAILS
COMMAND FORM: [DEVICE] NCD <Channel> <Value>
Where:
DEVICE: See General Text command form Description
NCD Text Command
Channel See M in Groups and Channels
Value
6 - 15 Set Noise cancellation from 6 to 15dB
Null Return the current mode
RETURN VALUES
Unit will return the updated state of the last selection in the same form as the command.
If Command Returns
Noise cancellation on channel 1 is set to 10dB <DEVICE> NC 1 10